Universal testing machine, hydraulic, servo-controlled and computerized, for performing controlled testing of loads and displacements in traction, compression, bending and bending with appropriate accessories, at medium to high strength and large samples, in many fields of use, from the control industry Production in the sector, certification of materials by accredited testing laboratories, from research and development of new technologies in universities and research centres to institutional training of technicians.
HUT-DJ Series Universal Testing Machines is designed with single workspace. It can do tension, compression, bending and shearing tests. Force measurement is through load cell. With long travel actuator stroke, it is suitable to test standard specimens, long length specimens, and specimens with large elongation
1.Single-space structure, all tests are done in the same space inside, driving the cylinder on the home;
2.Product has a wide testing range, from 300kN to 3000kN to meet different needs;
3.The mainframe is full rigid and gap-free structure. When the tensile specimen is broken, the testing machine has no impact on the ground. Meanwhile, the host has the advantages of high resistance to pull (pressure). The specimen can also be tested normally for different shafts.
4.The testing machine has high coaxial , while the test without any additional resistance force in the load cell above the test results more accurate;
5.Adopt optical encoder out of measurement displacement, high precision, impact resistance, high strength.
|
Model |
HUT305DJ |
HUT605DJ |
HUT106DJ |
|
Max. Load capacity(kN) |
300 |
600 |
1000 |
|
Structure |
Four column |
||
|
Accuracy of testing load(%) |
±0.5 |
||
|
Accuracy of deformation(%) |
±0.5 |
||
|
Test Range |
1%-100% |
||
|
Deformation measurement range |
1%-100% |
||
|
Posion rising speed(mm/min) |
0-250 |
0-250 |
0-150 |
|
Piston descending speed(mm/min) |
0-250 |
0-250 |
0-180 |
|
Test Force Loading Rate Range |
0.02%-2%FS/s |
||
|
Host structure |
2 |
4 |
4 |
|
Max. Tensile space(mm) |
400 |
580 |
680 |
|
Max. Compression space(mm) |
300 |
460 |
520 |
|
Actuator stroke(mm) |
370 |
580 |
680 |
|
Max. Loading speed(mm/min) |
100 |
100 |
75 |
|
Distance between columns(mm) |
500 |
490x330 |
660x400 |
This series material testing machine product group was primarily developed for standardized tests on ma- terials and components. Used in conjunction with the intuitive HKtest software. Test Typical: wide range of tension, compression, bending, shearing and low cycle test, include metal, building components, rubber, plastic, spring, high strength steel (HSS), aerospace and automotive structures, screws, nuts,large fasteners, wood products etc.
1.Guarantee for 12 months except consumables parts. Extra fee is paid if out of date. Any damage to the machine caused by improper use will be charged.
2.Free installation and fully test before sending and free training for operators.
3.24-hour technical support internet or by Telephone.free instructions and Problem solving.
4.When receiving the your money, we will prepare machine for you,it will spend 7-10 days.to get the shipping pictures for you.
Hot Tags: 300/600/1000kn computerized hydraulic universal tensile tester, China 300/600/1000kn computerized hydraulic universal tensile tester manufacturers, factory, Stress Strain Test Machine, Fabric Tensile Strength Tester, Electromechanical Universal Testing Machines, Universal Tensile Testing Machine, Screen Display Hydraulic Universal Testing Machine, Biaxial Tensile Testing Machine
