Application
The XG Series hydrostatic blasting tester is suitable for the determination of the hydraulic instantaneous blasting of various plastic pipes for fluid transportation and the determination of the rupture resistance time of thermoplastic pipes under long-term constant pressure. It is a necessary testing instrument for scientific research institutes, quality inspection departments and pipe manufacturers.
The hydrostatic testing machine adopts the central cluster control of embedded PC (hereinafter referred to as PC). Each channel is a module,
Each module is equipped with a microcomputer, which is used to receive the embedded PC control instructions and realize the control. At the same time, the control information is continuously fed back to the PC through the serial bus, and the PC completes the collection and storage functions of the test data. It has the functions of pipe rupture identification, real-time monitoring, incoming call data recovery, printing, storing test results, and sample preprocessing settings.
Standard
|
Standard No. |
Standard Name |
|
GB/T6111-2018 |
Thermoplastics piping systems for the conveyance of fluids-Determination of the resistance to internal pressure |
|
GB/T15560-95 |
STANDARD test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids |
|
IS01167-2006 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids --Determination of the resistance to internal pressure -- Part 1: General method |
|
IS01167-2006 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids --Determination of the resistance to internal pressure -- Part 1: General method |
|
ASTM D1598-2004 |
Pipe, Plastic, Under Constant Internal Pressure, Time-to-Failure of (No S/S Document) |
|
ASTM D1599 |
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings1 |
Technical parameter
|
XG-10T Pipe Pressure Burst Testing Machine |
||
|
Test pipe diameter range |
D16~1000 |
|
|
Number of test routes |
3 way(other optional) |
|
|
Control method |
PC control |
|
|
Data preservation |
Each channel has a power-off data protection function, which can be restored after power-on |
|
|
Time |
Timing |
0~9999 hours 59 minutes 59 seconds |
|
Timing accuracy |
±0.1% |
|
|
Time resolution |
1s |
|
|
Minimum setting unit |
min |
|
|
Pressure |
Pressure control range |
0.4~10MPa can be set arbitrarily; other pressure units can be set such as: MPa, PSI or bar |
|
Pressure Control Accuracy |
-1%~ +2%, can also be set arbitrarily |
|
|
Pressure display resolution |
0.001MPa |
|
|
Measuring range |
4%~100%FS |
|
|
Indication allowable error limit |
Within 1% of the indicated value |
|
Working principle
Input the parameters such as ring stress, wall thickness and average outer diameter of the pipe on the PC, and automatically calculate the test pressure. The data is transmitted to the lower computer (MCU embedded system) through the RS232 serial port, and the lower computer automatically conducts constant pressure on the pipe. High pressure pump A high-pressure liquid pressure source is generated, and through the pressure control system, the high-pressure hose is transported to the sample in the medium incubator, and the long-term hydrostatic test or blasting test of the pipe is carried out. The test results of this equipment can fully reflect the level of product quality of the enterprise.
Pressure source system:
1) The main pressure source is integrated, and one pressure source can be connected to multiple hosts
2) High main pressure and large flow
3) Wide pressure range, storage pressure can be adjusted arbitrarily
4) The automatic water replenishment module can be added to ensure that the pump body is not damaged due to water interruption
5) Low noise, safe and stable
6) The instrument comes with leakage protection and water shortage protection functions
Hot Tags: pipe pressure burst testing machine, China pipe pressure burst testing machine manufacturers, factory
