This series testing machines is mainly suitable for rubber, plastic profile, plastic pipe, sheet, sheet, film, wire and cable, waterproof coil, wire and other materials in high temperature or low temperature environment, tensile, compression, bending, peeling, tearing, shear and other mechanical properties of the test; It is very convenient for users to carry out research and development, quality control work, and is an ideal testing instrument for industrial and mining enterprises, commodity inspection arbitrati on, scientific research units, colleges and universities, engineering quality departments.
ASTM E83, ISO 9513, BS 3846, EN 10002-4.
Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.
|
MODEL |
KASON-100EGD |
|
Testing Machine Specifications |
|
|
Load Capacity (kN) |
100 |
|
Load accuracy |
Class 0.5 |
|
Testing Load Accuracy |
±0.5% |
|
Testing Load Range(FS) |
0.2%- 100% |
|
Load Resolution |
1/500,000FS |
|
Deformation accuracy |
≤±0.5% of 0.4%~ 100% of rated capacity |
|
Position resolution |
0.025μm |
|
Position accuracy |
±0.02mm or 0.5% of displacement (whichever is greater) |
|
Crosshead speed range |
0.001-500 |
|
Crosshead speed accuracy |
±0.5% of set speed (zero or constant load) |
|
Crosshead Travel(mm) |
1100 |
|
Room temperature Tensile Space(mm) |
650 |
|
Room temperature Compression Space(mm) |
1000 |
|
Room temperature Test width (mm) |
550 |
|
Load cell |
High-precision USA load cell |
|
Position limit switch |
Upper and lower lights |
|
Power Supply |
AC220V± 10%, 50Hz/60Hz |
|
Overall Dimensions (L*W*H: mm) |
According to the size of High and Low temperature test chamber |
|
Weight(kG) |
According to the size of High and Low temperature test chamber |
|
Note: Extra wide and/or extra height frames are available.Power supply system is completely customizable.Tensile space, test width, and speed is completely customizable. |
|
|
High and low temperature environmental test chamber Specifications |
|
|
Operating temperature range |
-60 -300C |
|
Cooling system |
compressor |
|
Temperature uniformity |
< 200 ≤±2°C , ≥ 200 ≤±3,5°C |
|
Temperature Fluctuation |
≤±1°C |
|
Heating rate |
2-3C/min |
|
Power |
220V |
|
Material of inner box |
stainless steel |
|
Outer box material |
stainless steel |
|
Heating system |
Nickel-chromium alloy heating wire heater |
|
Insulation Materials |
Ultra-fine glass wool or rigid foam |
|
Air supply circulation system |
a: motor b: lengthened shaft c: centrifugal fan |
|
Chamber Door |
Monolithic door |
|
Controller |
Temperature Controller |
|
Control panel |
Rotary switch |
|
Inside dimensions(mm) |
350*260*400 |
|
Outside dimensions(mm) |
1100*420*560 |
Kason software refers to the software characteristics of the top manufacturers of testing machine in the world and proposals of various testing requirements from the end users, and combines all the advantages of former versions of software with lots of new features. Optimized software structure makes the testing operation easy, convenient and powerful. Main interface as following, Computer software interface,display test data, setup method, sample size.
Global Reach, Delivered Locally
With six international offices, a network of over 100 distributors, and a dedicated team of highly experienced product specialists, support is always close at hand. We have the global reach to give you access to the relevant technical expertise, pre-and post-sales technical support and training to ensure you get maximum lifetime value from your investment, wherever you are in the world.
Quality Standards & Accreditation
ISO:9001 and CE accredited and an active member of all the main international standard organizations, including GB, ISO, EN, ASTM, AASHTO and AWRG, we are also involved in steering future Standards’ development so they are written with practical operation and application in mind for the benefit of the end-users.
Hot Tags: high and low temperature tensile testing machine, China high and low temperature tensile testing machine manufacturers, factory, Computer Control Electro hydraulic Universal Testing Machine, Computerized Universal Testing Machine, Universal Testing System, Computer Servo Hydraulic Universal Testing Machine, High and Low Temperature Tensile Testing Machine, Hydraulic Type Universal Testing Machine 1000 KN
