ETM series electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components. The load frames are rigid constructed, providing superior axial and lateral stiffness.
ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228-2002, GB 16491-2008, HGT 3844-2008 QBT 11130-1991, GB13-22-1991, HGT 3849-2008,GB6349-1986, GB/T 1040.2-2006, ASTM C165, EN826, EN1606, EN1607, EN12430 etc.
High accuracy:
The preloaded precision ball-screw ensures high speed and position measurement accuracy.
Safety features:
The testing machine stops automatically when the change in the test force exceeds a specified value during operations.
Large space in the working area
The insides of columns provide wide space for the operator.
Over-stroke limiter
The range of the crosshead movement mechanically limited.
Main technical parameters
|
Model |
KASON ETM 305 |
|
Measurement Parameters |
|
|
Load Capacity |
300KN |
|
Load measurement |
Universal strain-gage load cell (tension-compression). Additional load cells can be installed |
|
Load accuracy |
Class 0.5 according to ISO 7500-1 - Meets ASTM E-4 |
|
Measuring Range of test force |
0.4%-100%FS |
|
Indicating error of test force |
Within ±0.5% of indicating value |
|
Load resolution |
Capacity/ 500, 000 (fully auto scaling of single measurement range) |
|
Deformation measuring range |
0.2%～100%FS |
|
Deformation accuracy |
≤±0.5% |
|
Deformation rate adjustment range |
0.02～5%FS |
|
Displacement accuracy |
Within ±0.5% of the value |
|
Displacement resolution |
0.04μm |
|
Control Parameters |
|
|
Adjustable range of force control rate |
0.001％～5％FS/s |
|
Control accuracy of force control rate |
When rate is less than 0.05%FS/s, within ±2% of setting value; When rate is no less than 0.05%FS/s, within ±0.5% of setting value. |
|
Adjustable range of deformation rate range |
0.005～5%FS/s |
|
Control accuracy of deformation rate accuracy |
When rate is less than 0.05%FS/s, within ±2% of setting value; When rate is no less than 0.05%FS/s, within ±0.5% of setting value. |
|
Crosshead speed range |
0.001～500mm/min |
|
Crosshead speed accuracy |
Within ±0.5% of the value |
|
Mainframe parameters |
|
|
Testing space (Crosshead Travel) |
1235mm |
|
Max. Tensile Testing Space |
650mm |
|
Test width |
600mm |
|
Machine Dimension |
1060x620x2320mm |
|
Approx Weight |
1800kg |
|
Power supply |
3phase AC220V±10%,50/60Hz |
|
Power consumption |
2.5kW |
SOFT WARE INTRODUCTION
1. Full digital control The whole measuring and control system adopts the special controller, which can achieve the digital adjustment of zero point and gain of load, deformation and displacement, and it's easy to operate and possesses the high reliability.
2. Possess the functions of storage, setting and loading for various kinds of parameters, which make it convenient to connect multiple transducers with one load frame.
3. Realize the close-loop control, and show the reference curve during the executive operator adjusting the close-loop parameters, so the user can observe the close-loop effect caused by the parameters.
4. Perfect graphic function to complete the functions of the reappearance, amplification, reduction, self-adaptation, lapping of the curves, display and print the curve at the appointed range, observe the coordinate of the test point.
5. Data processing supports automatic analysis and graphic man-machine mutual processing, which is convenient to check and compare the test results.
1.Guarantee for 12 months except consumables parts. Extra fee is paid if out of date. Any damage to the machine caused by improper use will be charged.
2.Free installation and fully test before sending and free training for operators.
3.24-hour technical support internet or by Telephone.free instructions and Problem solving.
4.When receiving the your money, we will prepare machine for you,it will spend 7-10 days.to get the shipping pictures for you.
The company occupies an area of 23,500 square meters and has a construction area of 19,800 square meters. It has a comprehensive office building, scientific research office building, electrical installation and debugging building, assembly shop, heavy machine workshop, machine shop, blanking workshop and painting. Production and office facilities such as workshops, cold work workshops, measurement rooms, and product showrooms. The annual production capacity of the test machine can reach more than 1,500 units. We sincerely welcome customers from home and abroad to visit us, let's make progress together and reach win-win cooperation!
Hot Tags: 300kn computer control electronic universal tensile testing machine, China 300kn computer control electronic universal tensile testing machine manufacturers, factory, 100N 300kN High Temperature Tensile Testing Machine, 200 300KN Metal Material Electronic Tensile Testing Machine, 500 600KN Large Capacity Metal Material Electronic Tensile Testing Machine, Electronic Tensile Testing Machine, Plastic Film Tensile Strength Testing Machine, Tensile Testing Machine
