Robot Automatic Electromechanical Tensile Testing Machine to achieve loading, measuring sample cross-section size, testing, unloading, test data upload and other processes fully automatic.
The operator places the sample to be tested on the sample frame, and until the test data is transmitted to the host computer, the entire test process (including sample taking from the sample frame, cross section measurement, sample centring, sample clamping, test conditions setting, test, test result judgment, test result transmission, waste sample collection, etc.) is a continuous automatic control process that is unmanned. In the case of no need to replace any accessories on the test machine (such as jaws, etc.) and test software Settings, it is possible to meet the requirements of different samples (the same type) under different tensile conditions for continuous testing. The overall security of the equipment, with abnormal automatic alarm prompt function.
Main operation steps: During the automatic test, the test personnel will put the sample into the specified sample frame according to the test sequence prepared by the testing machine. The robot grabs the sample according to the sample position set (automatic or manual) in the test software in advance, and then measures the length, the center position of the sample (using the length and width of the parallel section), and the cross-section size. Then the sample is sent to the fixture, and the video extensometer automatically tracks it; Automatically invoke the predetermined test method or test program for tensile test while ensuring alignment (up and down, back and forth). During the test, the robot will repeat the above automatic program to prepare the next sample to be tested. After the current tensile test is completed, the robot will classify and recycle the qualified and unqualified samples, and the test result data will be automatically uploaded. The robot will send the prepared samples to the fixture directly to complete the tensile test automatically. This is repeated until all the samples placed on the sample rack have been tested.
Application range
JIS Z 2241《Metallic materials - Tensile testing -Method of test at room temperature》
ISO 6892.1《Metallic materials - Tensile testing -Part 1 Method of test at room temperature》 ASTM E8/E8M《Standard Test Method for Tension Testing of Metallic Materials》
ASTM A370《Standard Test Methods and Definitions for Mechanical Testing of Steel Pro